HiModel
NGH GF38 38CC 4-STROKE PETROL ENGINE |
| Type | 4-stroke Air cooled Gasoline Engine for Model Airplane Use Only |
| Displacement | 37.97cc |
| Bore*Stroke (mm) | 39*31.8 |
| Carburetor | Walbro custom WT1022 |
| RPM range | 1800-8000rpm |
| Spark plug type | CM-6 |
| Recommended propellers | 18*10, 19*8, 19*10, 20*8 |
| Weight | 1310g |
, , , , , , Specifications:, , , , , , , , , , , Compression ratio: 9, Break in fuel oil ratio: 25:1, General use fuel oil ratio: 35:1, , ,
Features: This is the new NGH GF38cc 4-stroke gasoline engine. ...4 Reviews
HiModel
NGH 38CC 4-STROKE PETROL ENGINE PRO VERSION GF38-PRO
| Displacement | 37.97cc |
| Bore*Stroke (mm) | 39*31.8 |
| Carburetor | Walbro custom WT1022 |
| RPM range | 1800-8000rpm |
| Spark plug type | CM-6 |
| Recommended propellers | 18*10, 19*8, 19*10, 20*8 |
| Weight | 1310g |
, , , , , , Specifications:, , , , , , , , , , , NGH 38CC 4-Stroke Petrol Engine Pro Version GF38-PRO, Below specs are for previous NGF 38CC engine, for reference only., Compression ratio: 9, Break in fuel oil ratio: 25:1, General use fuel oil ratio: 35:1, , ,
Features: This is the new PRO version NGH 38cc 4-stroke ...1 Reviews
HiModel
NGH 9CC PETROL ENGINE FOR RADIO CONTROL AEROPLANE GT9
| Engine Type | Gasoline Two-stroke, Air Cooled |
| Displacement (cc) | 9.07cc |
| Bore x stroke (mm) | 23.35 x 21.2 |
| Carburetor | NGH made 60G needle with pump membrane |
| Max output | 0.8HP@15000RPM |
| RPM Range | 2600-15000RPM |
| Ignition | Auto advanced Rcexl DC-CDI with special spark plug cap |
| Spark plug type | 1/4 x 32 Rcexl |
| Ignition Power | 4.8V |
| Lubrication Oil | 2 cycle engine Oil API TC/JASO FD or better specs. (Mobil + M2T) |
| Recommended propellers | 10 x 6 to 12x6 (two blades) |
| Weight | 425g (without ignition) |
, , , , , , Specifications:, , , , , , , , , , , Break-in fuel oil ratio: 20:1 (5%), General use fuel: 25:1 (4%), (Oil percentage can not less than 4%), 545g complete, , ,
Features: This is a new generation of small gas quality ...11 Reviews
HiModel
NGH 17CC PETROL ENGINE FOR RADIO CONTROL AEROPLANE
| Engine Type | Gasoline Two-stroke, Air Cooled, Rotary Valve |
| Cylinder Type | Precision Steel Sleeve |
| Cylinders | Single |
| Mounting Type | Beam or Rail Mount |
| Carburetor Type | Walbro WT Series |
| Carburetor Mounting | Front |
| Crankshaft Threads | 5/16" X 24 TPI |
| Mounting Dimensions | Owners Manual or Website |
| Plug Type | 1/4 X 32 |
| Displacement | 1.02 cu in.(16.91cc) |
| Bore | 1.14 in. (29mm) |
| Stroke | 1.01 in (25.6mm) |
| Engine (Only) Weight | 730g |
| Ignition Weight | 120g |
| Prop Range | 14*8,15*8,16*8 |
| RPM Range | L 2100-9000 |
| Pre-Mix Oil Ratio and Type ： Break-in with 25 | 1, General 35 |
, , , , , , Specifications:, , , , , , , , , , , Crank Type-Forged： Dual Ball Bearing Support, Fuel： Unleaded Gasoline With High-Quality Two-Cycle Oil, Pre- Mixed, compression ratio: 10, *Mounting dimension is similar to conventional .90 class Nitro engine., , ,
Features: This is a new generation of small gas quality ...17 Reviews
HiModel
NGH GT25-B PETROL ENGINE FOR RADIO CONTROL AEROPLANE
| Pre-Mix Oil Ratio and Type Break-in with 20 | 1, General 25 |
, , , , , , Specifications:, , , , , , , , , , , Specifications, Engine Type Gasoline Two-stroke, Air Cooled, Rotary Valve, Cylinder Type Precision Steel Sleeve, Cylinders Single, Crank Type-Forged Dual Ball Bearing Support, Mounting Type Beam or Rail Mount, Carburetor Type Walbro WT Series, Carburetor Mounting Front, Crankshaft Threads 5/16" X 24 TPI, Mounting Dimensions Owners Manual or Website, Plug Type 1/4 X 32, Displacement 1.5 cu in.(25.1cc), Bore 1.307 in. (33.2mm), Stroke 1.142 in (29mm), Engine (Only) Weight 830g, Ignition Weight 120g, Prop Range 16*8,16*10，17*8，17*10, RPM Range 1800-9000, Fuel Unleaded Gasoline With High-Quality 100% Synthese Oil, Pre- Mixed, compression ratio 10.5, Performance, Prop RPM, JXF 15*8 9400, JXF 16*8 8400, JXF 17*8 7800, , ,
Features: THIS IS THE UPGRADED VERSION OVER PREVIOUS GT25, BALL ...4 Reviews
HiModel
REMOTE CONTROLLED TWO-CYLINDER NITRO ENGINE GLOW PLUG DRIVER RCD3004
, , , , , , Specifications:, , , , , , , , , , , Application range, Start and stabilizing for two-cylinder engine, Start and stabilizing two single-cylinder engines simultaneously, , ,
Features: Features Supply power for two-cylinder engine simultaneously Independent power ...HiModel
3-IN-1 15A SWITCH HARNESS W/ NITRO ENGINE IGNITER
| working voltage | 4.2—13V |
| Working current of the switch | 0-15A |
| operating current of the igniter | 0-5A |
| output voltage of the igniter | 1.5V |
| Weight | 60g(include the wire) |
| Volume | 40mm ( L ) * 22mm ( W) * 34mm ( H ) |
, , , , , , Specifications:, , , , , , , , , , , 3-in-1 15A Switch Harness W/ Nitro engine igniter, Attentions:, Not allowed to counter-battery polarity., Do not come into contact with installation of grease or water, or near a corrosive substance., Please use the low resistance, large capacity battery, because starting ignition requires relatively large current., , ,
Features: Buzzer prompts ignition status ( buzzer sound is ...HiModel
PISTON FOR CRRCPRO 26CC PETROL ENGINE
| Manufacturer part number | 26040 |
, , , , , , Specifications:, , , , , , , , , , , Piston for CRRCPRO 26cc Petrol Engine, , ,
Includes/Requires: Includes:26040 X1HiModel
SMALL 45×73 MM ADJUSTABLE ENGINE MOUNTS
| Size | 45×73 mm |
, , , , , , Specifications:, , , , , , , , , , , Small Adjustable Engine Mounts, Suitable for 20-48 class engines, , ,
HiModel
LARGE 60×110 MM ADJUSTABLE ENGINE MOUNTS
| Size | 60×110 mm |
, , , , , , Specifications:, , , , , , , , , , , Large Adjustable Engine Mounts, Suitable for 60-120 class engines, , ,
HiModel
12-18V HIGH TORQUE WIDE RANGE ELECTRIC STARTER (40 TO 180 CLASS NITRO/ 15-30CC GAS ENGINE) W/ D44MM DRIVE CONE
| Power input | 12-18V (12V 9AH+ Pb-Acid battery is recommended) |
| Suitable engine class | 40 to 180 class Nitro engines or 15CC to 30CC petrol engines |
| Outer diameter of the aluminum drive cone | 44mm |
| Inner diameter of the aluminum drive cone | 35.6mm |
| Inner diameter of the rubber insert | 23mm |
, , , , , , Specifications:, , , , , , , , , , , Different holding positions demo:, , ,
Features: ●High power & reliable ●Easy to use ●For airplanes, ...4 Reviews
HiModel
12-18V HIGH TORQUE WIDE RANGE ELECTRIC STARTER (40 TO 180 CLASS NITRO/ 15-30CC GAS ENGINE) W/ D59MM DRIVE CONE
| Power input | 12-18V (12V 9AH+ Pb-Acid battery is recommended) |
| Suitable engine class | 40 to 180 class Nitro engines or 15CC to 30CC petrol engines |
| Outer diameter of the aluminum drive cone | 59mm |
| Inner diameter of the aluminum drive cone | 51.6mm |
| Inner diameter of the rubber insert | 38mm |
, , , , , , Specifications:, , , , , , , , , , , Different holding positions demo:, , ,
Features: ●High power & reliable ●Easy to use ●For airplanes, ...2 Reviews
HiModel
12-18V HIGH TORQUE ELECTRIC STARTER (80-250CC GAS ENGINE) W/ALUMINUM CASE
| Power input | 12-18V (12V 9AH+ Pb-Acid battery is recommended) |
| Suitable engine class | 80CC to 250CC petrol engines |
| Max torque | 120kg/cm. |
| Weight | 2.75kg |
| Outer diameter of the aluminum drive cone | 59mm |
| Inner diameter of the aluminum drive cone | 52mm (approx.) |
| Inner diameter of the rubber insert | 38mm (approx.) |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: ●High power & reliable ●Easy to use ●For large ...HiModel
D63X80MM WATER PROOF ROUND BASE ADJUSTABLE ENGINE MOUNTS
| Size | 63×80 mm |
| Mount size | 13×12.5×70mm |
, , , , , , Specifications:, , , , , , , , , , , Water proof Round Base Adjustable Engine Mounts, , ,
HiModel
16×12 /406.5×305MM NYLON PROPELLER FOR NITRO ENGINE
| Length | 16 inch |
| Pitch | 12 inch |
| Weight | 103g / 3.63 oz |
| Hub Thickness | 20 mm |
, , , , , , Specifications:, , , , , , , , , , , Nylon Propeller for Nitro Engine, , ,
Includes/Requires: Includes:2 x props 4 x locating rings